Video Text Inserter Kits for SAM4s (formerly
This kit is for SAM4s Cash Registers and POS
(formerly known as Samsung). These kits are put to together to
provide the easiest setup in the industry. We provide the cables
and accessories needed for standard setups and also instructions
on how to setup the system and video text inserter. If you have
any other combinations please give us a call!
SAM4s (Samsung) Cash Register Kit
|PLEASE DO NOT ORDER
IF YOU DO NOT UNDERSTAND THE APPLICATION REQUIREMENTS
Call us for order help.
I agree to all terms, and am
ready to buy now.
Works with SAM4s cash registers with serial port
interface for pole display or journal printer.
SAM4s Models include: ER-285, ER-380*, ER-380M*,
ER-390M, ER-5115II, ER-5215M, ER-5200M, ER-5240M,
ER-600, ER-650, ER-650R, ER-655II, ER-920, ER-925,
ER-940, ER-945, SPS-320, SPS-340, SPS-345, SPS-520FT,
SPS-520RT, SPS-530FT, SPS-530RT, SER-7000, SER-7040,
SPS-1000 and SPS-2000.
SPECIAL CASE: Samsung models: 6540 II (But not
the plain 6540, sorry)
Serial setup for SAM4s Registers:
- bps = 9600
- Data bits 8
- Stop bits 1
- Parity bit NONE.
- Port type set for Remote Journal Printer (TVS
Interface) if possible or Epson Pole
Setup notes for some SAM4s models:
- How To
Configure SAM4S ER-5215M for Journal Printer
instructions to configure SAM4S ER-5200M - 5240M
- Presentation on
Setup for SAM4s ER-650 for Journal Printer and
Setup ER 650 register summary
Notes on SAM4s ER-5115II for Journal Printer
- Setup key
board instructions to configure SPS-3xx serial
- Setup Notes
on SAM4s SPS500 for Journal Printer
- Setup key
board instructions to configure ER-9xx serial
See other register and POS setup information on our "How to Set Up" page
* Set serial port for Pole Display
|SAM4s Kit Application Requirements:
NOTE: You must have an available serial port
or you must loop through to either an EPSON compatible
pole display or a Journal Printer. You can not
loop through to a bar code reader.
The ECR owner is responsible for configuring the ECR
serial port as required for Journal Printer data. Back
up any critical data before making changes to the ECR.
- VR2004 Text Inserter.
- Text Inserter
- Wall Transformer
- Two RJ45 to DB9
- Handshake Adapter
- RCA Cable 3 FT.
There will be a 15% restock fee for incorrect orders, so
please check your application before you order.
These kits contain the items you typically need to interface
to the cash register or POS system for which the kits are
designed. It is the responsibility of the purchaser to check
for acceptable placement of the Text Inserter with the power
supply, and cable(s) provided and to adapt cables or provide
cables of unusual length for their particular
In addition to the price noted the shopping cart will add a
Shipping & Handling fee good only for shipping to the
lower 48 states, UPS ground. Shipping to Alaska and
Hawaii and outside the United States is extra so please call.
We do not ship to a PO Box. No COD. Orders accepted subject to
product availability. Orders are general accepted M-F except
holidays. Orders received after 12:00 Eastern Time generally
ship the next day.